SAE AMS5676 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 80Ni - 20Cr
作者:标准资料网 时间:2024-05-30 04:22:16 浏览:8241
来源:标准资料网
Product Code:SAE AMS5676
Title:Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 80Ni - 20Cr
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion and heat resistant nickel alloy in the form of welding wire.
上一篇:
SAE AMS5593 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W 下一篇:
SAE AMS5664 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90T【英文标准名称】:Acid-gradeandceramic-gradefluorspar;determinationofmanganesecontent;periodatespectrometricmethod
【原文标准名称】:酸性和陶瓷性荧石锰含量的测定高碘酸盐光谱法
【标准号】:ISO9062-1992
【标准状态】:作废
【国别】:国际
【发布日期】:1992-12
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC175
【标准类型】:()
【标准水平】:()
【中文主题词】:锰;分光光度法;萤石;含量测定;光度测量法(化学分析);金属矿物;高碘酸盐;酸;化学分析和试验;陶瓷;矿物
【英文主题词】:Acids;Ceramics;Chemicalanalysisandtesting;Determinationofcontent;Fluorspar;Manganese;Minerals;Ores;Periodates;Photometry(chemicalanalysis);Spectrophotometry
【摘要】:ApplicabletoproductshavingMn-contentsintherange0,006%to0,4%.Decompositionofthetestportionwithnitricandperchloricacids.Afterdilutionfollowsoxidationofmanganesetopermanganatewithsodiummetaperiodate.Spectrometricmeasurementat545nm.
【中国标准分类号】:D52
【国际标准分类号】:73_080;81_060_10
【页数】:7P.;A4
【正文语种】:英语
Product Code:SAE J2196
Title:Service Hose for Automotive Air Conditioning
Issuing Committee:Interior Climate Control Committee
Scope:This SAE Standard covers reinforced rubber, reinforced thermoplastic, or otherwise constructed hose, or hose assemblies, intended for conducting liquid and gaseous refrigerants for service connections from mobile air conditioning systems to service equipment such as a manifold gauge set and vacuum pumps or for use internally, in charging stations or service equipment intended for use in servicing mobile air-conditioning systems.The hose shall be designed to minimize permeation of refrigerants and contamination of refrigerant passing there through and to be serviceable over a temperature range of -30 to 95°C. Hose working pressure shall be a least 3.4 MPa and the minimum burst pressure be at least 5 times.
